 |
|
|
|
 |
|
OverviewThe AVIT can run as a standalone tool without a PC
attached during operation. The 200MHz ARM processor has
256MB RAM to run Linux and store data. It includes a
file and web server to simplify development of remote
diagnostics and management applications. Imagine writing
your own C/C++ application to perform an on-road test,
then use 802.11 WiFi to wirelessly download a vehicle's
data as soon as it re-enters the repair facility. Your
program could access GPS (via expansion ports) to capture
location information about the test-drive, or use a
cellular modem and download telemetry from live tests!
For standalone applications, this provides the features
of a PC host and a PassThru device all in one package.  (Jump to Online Order Form) Bus Protocols• CAN bus (capable of ISO 15765, GMLAN or J1939) • 2nd CAN (Dual or Single Wire) • Ford SCP (J1850PWM) • GM Class2 (J1850VPW) • J1708 / J1587
Industry Standard API• J2534 support for the following protocols: CAN, J1850PWM, J1850VPW • RP1210 support for the following protocols "J1939, J1708, CAN, J1850, IESCAN, J1850_104K and J1850_416K • Supports J2534-2 (MSCAN, SWCAN, 1Mb CAN, CAN_MIXED_MODE, Analogs)
Analog inputs• 16 analog channels, +/-5V at 12 bits • 10KHz per channel sample rate • 3% full-scale accuracy • Nearly 1M ohm input impedance • Divided into 2 independent banks of 8 channels each • +/-40V input protection • 5KHz anti-aliasing in hardware (4-pole Butterworth) • Software selectable filtering
Other Inputs/Outputs• 4 digital I/O lines for hand-held triggers, LEDs, etc. • 4 LEDs on front panel under software control • Internal CF memory slot (factory option 2GB - 16GB) • RS-232 for GPS (Non-isolated)
2 USB Host connectors for:• Flash memory sticks • GPS • Accelerometers • EVDO cellular broadband or GPRS • LCDs, keyboards, etc.
System• 200MHZ ARM processor • 256MB RAM onboard • Embedded Linux Operating System
Low power (less than 100mA) sleep mode• sleep under software control • Wake-up via Banana jack (5-40V) input, or front button • Power Off (less than 10mA) • Can power itself off under software control • Power-On via Banana jack (5-40V) input, or front button
Connectivity• RJ-45 for wired 10Mb Ethernet • Internal wireless Ethernet (802.11b) with WEP (factory option) • external antenna for wireless • 15-pin D-shell vehicle connector
Physical Specifications• Operating voltage: 7 – 36 Volts • Size: 1.25"H x 9.5"D x 5.25"W • Operating Temperature: Industrial Range (-40 to +85 C) |
